CANOPIES RETURN TO EQUIPMENT INSTRUCTIONS
- Lay fittings and frame poles out on the ground and assemble the rafters and spreaders
- Fit all pieces together (do not attach the legs yet)
- Pull the cover over the frame
- Lift one side of the frame and install the two legs, go to the other side and lift it and install the other two legs
- Drive the anchor pins into the ground at the four corners at least one foot outside of the legs and on a slight angle away from the tent
- Buckle the straps that hold the cover to the frame and tie the anchor ropes to the anchor pins in the ground
- Attach walls if required
HINT: All poles have coloured markings and require two sections of the same colour to be placed together.
10’ x 10’ Parts List:
8 – 3’ 4” poles
6 – 4’ 10” poles
4 – 5’ 3” poles
6 – Fittings
6 – Pins
There are 18 pieces in the long bag.
The fittings and pins are in the smaller bag.
The cover and walls (when requested) are in the mid-sized bag.
10’ x 20’ Parts List:
12 – 3’ 4” poles
12 – 4’ 10½” poles
6 – 4’ 7” poles
9 – Fittings
6 – Pins
There are 30 Pieces in the long bag.
The fittings and pins are in the smaller bag.
The cover and walls (when requested) are in the mid-sized bag.
|
