POPCORN MACHINE RETURN TO EQUIPMENT INSTRUCTIONS

Note: Pop at least two batches of corn each time

1. Plug into a grounded electrical outlet
2. Turn all switches to the ON position
3. Let the kettle heat for approximately 4 minutes
4. Add oil bar from pre-measured popcorn packages
5. Let oil melt then add the kernels
6. Leave doors open when popping
7. Dump corn when popping is 95% complete to prevent burning

On your Final Batch turn kettle heat switch to off as soon as corn starts popping. When popping is complete, turn off motor switch. Keep popcorn warm with light warmer.

Troubleshooting: If corn is not popping, ensure the kettle heat switch is on and the sprocket at the top of the kettle is engaged with the kettle motor.

Remember your rental fee includes cleaning – do not attempt to clean or dismantle the machine.